BOBCAT HD-SDI
Hardware User’s Manual
Imperx, Inc.
Rev. 1.4
6421 Congress Ave.
6/2/2014
Boca Raton, FL 33487
+1 (561) 989-0006
98 of 175
1110 – Software (Bit Toggle)
Others – reserved
Data (31:4)
:
N/A
4.3.10.3.
OUT2 Output Polarity
This register sets the polarity (active Low or High) for the OUT2 output.
Address
:
0x0598
Data (0)
:
0 – active LOW
1 – active HIGH
Data (31:1)
:
N/A
4.3.10.4.
OUT2 Output Mapping
This register maps the various internal signals to OUT2 camera output.
Address
:
0x059C
Data (3:0)
:
0000 – Deselect
0001 – Exposure Start
0010 – Exposure End
0011 – Mid Exposure
0100 – Active Exposure Window
0101 – H-Sync
0110 – V-Sync
0111 – Odd/Even Frame Flag
1010 – Camera Ready
1011 – Pulse Generator
1100 – Strobe One
1101 – Strobe Two
1110 – Software (Bit Toggle)
Others – reserved
Data (31:4)
:
N/A
4.3.10.5.
Strobe #1 Select
This register sets the Strobe #1 mode of operation.
Address
:
0x055C
Data (1:0)
:
00 – disable Strobe #1
01 – enable Strobe #1 each frame
10 – enable Strobe #1 odd frames only
