INSTALL UP/DOWN CONTROLLER
All Olympus desk-tops have pre-drilled pilot holes for installing the hand controller on either the left or the right side of the desk.
Using the 2 small pan-head wood screws (Part # 16) supplied, attach the controller to your preferred location. The controller is on a slider plate
that moves to a slightly recessed and protected position. The Olympus series has a controller with 3 programmable memory positions and a
digital readout.
Up / down controller in place.
STEP 10
7
STEP 11
ASSEMBLE KEYBOARD PLATFORM
ATTACH the two keyboard platform supports to the
underside of the keyboard platform using three #10 1-1/4”
flat head Phillips screws and three spacers per platform
support. Position each set of spacers between the platform
support and the underside of the keyboard platform. DO
NOT place spacers between screw head and platform
support.
Position the tube assembly by matching the square
mounting plate to the triangular pattern of recessed holes in
the center of the underside of the keyboard platform. Attach
the mounting assembly to the underside of the keyboard
platform using four #10 5/8” pan head Phillips
1
2
