background image

WARRANTY

The iMovR Olympus warranty coverage includes a lifetime warranty on the steel frame, 5 years on the desktop and all other components.

THIS WARRANTY only covers defects as specified herein and does not include defects or damages attributable to improper installation, misuse or normal 

surface weathering, or defects or damages caused by accidents or fire or other casualty or Acts of God, or any other causes, or occurrences beyond the 

manufacturer’s control. The exclusive remedial action provided for the customer hereunder shall be repair, restoration or replacement of the components 

as are found to be defective.

TABLE TOP: The replacement of new materials for those as may result in a color variance in comparison to the originally installed laminates due to slight 

color or texture changes by laminate manufacturers and is not indicative of a defect. IMovR reserves the right to substitute such laminates as are then 

being manufactured and is only obligated to match color and quality with such products as its manufacturing at the time of replacement.

ELECTRIC BASE FRAME: New base frames may have paint defects or scratches on components that are hidden beneath the surface of the desk, which are 

normal. Painted components that are normally visible to sitting or standing users after installation of the table top, that arrive in damaged condition, will  

be replaced under this warranty if iMovR is notified before the component is installed.

THIS WARRANTY is limited to repair, restoration and/or replacement by iMovR of any defective unit provided the manufacturer: (a) receives a written, 

faxed or e-mailed notice of claim under this warranty, including sufficiently high resolution photographs that clearly show the nature of the damage, and 

(b) within 30 days after notice of claim, is in receipt of the defective unit at its place of business, unless this requirement is waived by iMovR. The manu-

facturer will arrange for retrieval of the defective product via its carrier-of-choice. In some cases the manufacturer may elect not to retrieve the defective 

component, and may opt to send a replacement product based only on photographic evidence of warrantied defects. If upon receipt and inspection of 

the returned component it is determined that the damage was not due to a manufacturing flaw but rather one of the exempted reasons stated above, the 

costs of shipping the units to and from the manufacturer, plus the cost of the replacement component, shall be charged back to the customer.

LIMITATION OF LIABILITY: IT IS UNDERSTOOD AND AGREED THAT MANUFACTURER’S LIABILITY, WHETHER IN CONTRACT, IN TORT UNDER ANY WARRANTY, 

IN NEGLIGENCE OR OTHERWISE, SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF PURCHASE PRICE FOR THE DEFECTIVE ITEM PAID BY PURCHASER 

AND UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR SPECIAL , INDIRECT OR CONSEQUENTIAL DAMAGES. NO ACTION, REGARDLESS OF FORM, 

ARISING OUT OF THE TRANSACTIONS UNDER THIS AGREEMENT MAY BE BROUGHT BY THE PURCHASER MORE THAN ONE YEAR AFTER THE CAUSE OF THE 

ACTION HAS ACCRUED.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, AND SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITA-

TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS HEREIN MAY NOT APPLY TO YOU. THIS WARRANTY 

GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE. THIS WARRANTY APPLIES ONLY IN THE 

U.S. AND CANADA. WARRANTIES OUTSIDE OF THE UNITED STATES MAY VARY. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS.

TO OBTAIN warranty repair please contact the iMovR Customer Care Department with the contact information provided below.

IMovR Contact Information:

Phone: 

(888) 208-6770 or (425) 999-3550

Fax:

 (425) 999-3550

E-mail:

 [email protected]

Live Chat:

 www.iMovR.com

Hours:

 See iMovR.com/hours

Omega Olympus

VERSION 12.01.15   

 IMOVR OLYMPUS INSTALLATION MANUAL

OO-REX-MANUAL

Summary of Contents for Omega Olympus

















Reviews: