imovr Omega Olympus, Installation Manual

Page: 12 / 16

INITIALIZATION PROCEDURE
The initialization procedure must be completed before the desk can be used.
MOVE UP AND DOWN
Step Operation Motion
1
Press and hold
p
&
q
simultaneously
more than 3 seconds
Legs begin to move down at a half speed of normal operation
2 Keep pressing q & p Legs move down to the lowest position and rebound 2-5 mm, then stop
3 Release q & p together Initialization is completed
Step Operation Motion
1 Press and hold p Legs move up
2 Release
p
Legs stop
3 Press and hold
q
Legs move down
4 Release
q
Legs stop
SET MEMORY POSITIONS
Step Operation Motion
1 Press and hold p or q then release Run the legs to the position you want the table surface to be
2
Click button S, then click button 1 or 2 or 3
within next 3 seconds
Position 1 or 2 or 3 is saved
MOVE TO THE MEMORIZED POSITIONS
Step Operation Motion
1 Press and hold the button 1 or 2 or 3 Legs return to the corresponding position saved
CONTROLLER INSTRUCTIONS
12