9
ATTACH KEYBOARD FENCE
TILT the Omega keyboard platform so that you can easily access
both the top and bottom of the rear end of the platform. Align
the three holes of the Fence with the three holes on the
bottom of the platform. Using three #10 5/8” pan head Phillips
screws, attach the keyboard fence to the back of the platform
so that the built-in cable guide is facing up when the keyboard
platform is flat.
Once the fence is attached to the Platform, you’re ready to install
the bumpers!
STEP 14
ATTACH RUBBER BUMPERS
ATTACH each rubber keyboard bumper to the keyboard platform by fitting a
carriage bolt through each of the two slots cut into the platform so that the
bolt’s head is flush with the underside of the platform. Secure each bumper
in place by using your hand to twist the rubber bumper of the bolt over the
screw threads.
STEP 15
