STEP 16
10
USING THE OMEGA KEYBOARD PLATFORM
THE OMEGA Keyboard Platform can be set to one of two
height positions. By default, the bar assembly arrives set to
the lower position. You can adjust the bar assembly higher by
removing the two hex screws from both ends of the pivot bar,
and reattaching the bar by inserting those same hex screws
through the upper set of holes on the bracket.
To adjust the Omega Keyboard Platform, simply loosen
the central clamp by twisting the rubberized knob
counterclockwise. Then push down on the rear end of the
platform for a steeper angle or push up from the bottom
of the platform for a shallower angle. Once you have the
platform set to the desired position, secure it in place by
tightening the rubberized knob by twisting it clockwise.
Depending on the depth and shape of your keyboard you
may want to adjust the rubber bumpers forward or back.
To do this, simply loosen the rubber bumper, slide it to the
desired location, and retighten.
