11
ATTACH the two foot supports to the underside
of the keyboard platform using three #10 1-1/4” flat
head Phillips screws and three spacers per foot support.
Position each set of spacers between the foot support
and the underside of the keyboard platform. DO NOT
place washers between screw head and foot support.
Position the tube assembly by matching the square
mounting plate to the triangular pattern of recessed
holes in the center of the underside of the keyboard
platform. Attach the mounting assembly to the
underside of the keyboard platform using four #10 5/8”
pan head Phillips screws.
11
ASSEMBLE KEYBOARD PLATFORM
FOR THIS STEP
IN ORDER FROM BOTTOM:
1. KEYBOARD PLATFORM
2. WASHER
3. FOOTREST
4. SCREW
6x
2x
6x
4x
