9
power outlet
ALL OMEGA
table tops have pre-drilled pilot
holes for installing the hand controller on either the left
or right side. The 72” and 83” long table tops also have
a center position, ideal for sit-stand-walk treadmill desk
configurations.
SLIP
the sliding plate into the controller with the
countersunk holes facing up (you may need to “snap” it in).
Flip the combined assembly upside down and screw into
the table top using the (3) small wood screws provided.
SEE NEXT PAGE FOR PLACEMENT ILLUSTRATION.
INSTALL DIGITAL CONTROLLER
FOR THIS STEP
10
3x
SCREW INTO THE DESK’S UNDERSIDE
FROM THE BOTTOM OF THE HAND
CONTROLLER ASSEMBLY
+
=
*all omega everest desks come with
an updated face plate for the hand
controller
