background image

19

WARRANTY

THE OMEGA EVEREST

 warranty coverage includes 20 years on the steel frame, 10 years on moving parts, 5 years 

on table tops, and 2 years on the electronics.  The following limitations apply: 

THIS WARRANTY

 only covers defects as specified herein and does not include defects or damages attributable to 

improper installation, misuse or normal surface weathering, or defects or damages caused by accidents or fire or 
other casualty or Acts of God, or any other causes or occurrences beyond the manufacturer’s control. The exclusive 
remedial action provided for the customer hereunder shall be repair, restoration or replacement of the components 
as are found to be defective.

TABLE TOP

: The replacement of new materials for those as may be defective may result in a color variance in 

comparison to the originally installed laminates due to slight color or texture changes by laminate manufacturers 
and is not indicative of a defect. iMovR reserves the right to substitute such laminates as are then being 
manufactured and is only obligated to match color and quality with such products as it is manufacturing at the 
time of replacement. 
Electric base frame: New base frames may have paint defects or scratches on components that are hidden beneath 
the surface of the desk, which are normal. Painted components that are normally visible to sitting or standing users 
after installation of the table top, that arrive in damaged condition, will be replaced under this warranty if iMovR is 
notified before the component is installed. 

THIS WARRANTY

 is limited to repair, restoration and/or replacement by iMovR of any defective unit provided the 

manufacturer: (a) receives a written, faxed or emailed notice of claim under this warranty, including sufficiently high 
resolution photographs that clearly show the nature of the damage, and (b) within 30 days after notice of claim, is in 
receipt of the defective unit at its place of business, unless this requirement is waived by iMovR. The manufacturer 
will arrange for retrieval of the defective product via its carrier-of-choice. In some cases the manufacturer may elect 
not to retrieve the defective component, and may opt to send a replacement product based only on photographic 
evidence of warrantied defects. If upon receipt and inspection of the returned component it is determined that 
the damage was not due to a manufacturing flaw but rather one of the exempted reasons stated above, the costs 
of shipping the units to and from the manufacturer, plus the cost of the replacement component, shall be charged 
back to the customer. 

LIMITATION OF LIABILITY:

 IT IS UNDERSTOOD AND AGREED THAT MANUFACTURER’S LIABILITY, WHETHER IN 

CONTRACT, IN TORT UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE, SHALL NOT EXCEED THE RETURN OF 
THE AMOUNT OF PURCHASE PRICE FOR THE DEFECTIVE ITEM PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES 
SHALL SELLER BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. NO ACTION, REGARDLESS OF 
FORM, ARISING OUT OF THE TRANSACTIONS UNDER THIS AGREEMENT MAY BE BROUGHT BY THE PURCHASER 
MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED.

SOME

 states do not allow limitations on how long an implied warranty lasts, and some states do not allow the 

exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions herein may 
not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary, from 
state to state.

TO OBTAIN

 warranty repair please contact the iMovR Customer Care department with the contact information 

on the back page.

Summary of Contents for Omega EVEREST





















Reviews: