14
AFTER
connecting all the cables and testing
that the desk is working properly, you may want to use
the supplied self-adhesive cable guides to tidy up the
cables for a cleaner appearance.
16
FINAL TOUCHES
FOR THIS STEP
ATTACH each rubber keyboard bumper to the
keyboard platform by fitting a carriage bolt
through each of the two slots cut into the platform so
that the bolt’s head is flush with the underside of the
platform. Secure each bumper in place by using your
hand to twist the rubber bumper of the bolt over the
screw threads.
15
ATTACH RUBBER BUMPERS
FOR THIS STEP
2x
2x
on the bottom of the platform,
put the carriage bolts through
the slots.
twist the rubber bumpers over
the bolts until they are secured
this is what the keyboard
platform should look like from
your perspective after you’re
done.
