Immergas AUDAX TOP, Instruction And Recommendation Booklet

Page: 27 / 72

3-2
12:34 Fr 3 Jan 2014
Mode Menu
20.6
°C
Room set 21.0°C
67%
13°C
4
2
1
3
27
3.2 REMOTE PANEL.
Key:
1 - Main parameters switch with button to con-
firm and save data
2 - Left context button
3 - Right context button
4 - Display
3-3
State Description DHW Cooling Central heating Anti-freeze
Stand-by
Disabled Disabled Disabled Enabled
Summer Enabled Disabled Disabled Enabled
Cooling Enabled Enabled Disabled Disabled
Winter Enabled Disabled Enabled Enabled
3.3 SYSTEM USE.
Once the device has been powered, it goes into
the status prior to switch-off. Press the “Mode”
button to cyclically select the desired mode
amongst those available.
The current operating mode in use is displayed
by the relative icon at the bottom left corner
(Fig. 3-3).
Also, depending on the system's configuration,
the main screen displays various information
regarding the system, amongst which:
State Description
nn
Room humidity value (if hu-
midity probe is present)
nn
External temperature value
(external probe enabled)
Request for room central heat-
ing or cooling in progress
Comfort temperature operation
Economy temperature opera-
tion
Operation in manual mode
External probe enabled
Anomaly present
DHW Comfort temperature
operation.
N.B.
in the absence of the icon,
the DHW will work with eco
temperature.
The information that can be changed for the area
is shown at the centre of the display.
The lower part of the display shows the param-
eter that can be changed (it varies according to
configuration). Once the system has captured
the data (indicated with the text “Attesa dati...”
(Waiting for data...), it is possible to change the
value by turning the main switch and pressing to
confirm the parameter change.
The values that can be found according to the
configuration, are:
- Set room: defines the room zone temperature.
- Set flow: defines the system's flow temperature
to the zone.
- Flow offset: changes the operation curve of the
external probe.