38
Menù Heat pump -> State
System status
Indicates the current system mode
0 = Off
1 = Wait after ignition
2 = Minimum compressor on time
3 = Minimum compressor off time
4 = delay for mode change
5 = Step 1 compressor
6 = Step 2 compressor
7 = Step 3 compressor
8 = Step 4 compressor
9 = Compressor stop delay
11 - Frequency reduction on
20 = Defrosting
39 = Minimum external tempera-
ture for central heating
40 = Maximum external tempera-
ture for central heating
41 = Maximum flow/return value
in central heating
42 = Low external temperature in
central heating
43 = Very high external tempera-
ture in central heating
44 = High external temperature
(compressor limitation)
45 = Step 1 High temperature
protection in central heating
46 = Step 2 High temperature
protection in central heating
47 = Step 3 High temperature
protection in central heating
48 = Step 4 High temperature
protection in central heating
50 = Minimum external tempera-
ture for cooling phase
51 = Minimum machine inlet
temperature for cooling phase
52 = External temperature <15°C
in cooling phase
53 = External temperature >26°C
in cooling phase
54 = External temperature >40°C
in cooling phase
55 = Low saturation temperature
57 = Step 2 antifreeze protection
in cooling
58 = Step 1 antifreeze protection
in cooling
61 = External temperature <0°C
and flow temperature > 12°C in
cooling phase
62 = External temperature <0°C in
cooling phase
70 = Protection for lack of flow rate
80 = Protection for oil return
85 = Compressor off from inverter
91 = Central heating integration
Summary of Contents for AUDAX TOP
Page 1: ...AUDAX TOP 18 21 ErP IE Instruction and recommendation booklet 1 040572ENG...
Page 2: ......
Page 70: ......
Page 71: ......