imagistics im4720, Operator'S Manual

Page: 18 / 237

xvi
Terms and Symbols for the Type of Originals and Paper
A few special terms and symbols are used in this manual to designate types of originals and paper. This
page explains about these terms and symbols.
Feeding Direction (paper path)
In this machine system, paper is taken up from the right-hand side of the machine and fed through the
machine toward the left-hand side onto the Copy Tray. In the figure below, the direction in which the
paper is fed, as indicated by the arrow, is called the “feeding direction.”
“Width” and “Length”
Terms and Symbols Used
4002O120AC
1139O1610A
When we talk about the size of the original or copy,
we call side A “width” and side B “length.”
A: Width
B: Length
1139O1610A
<Lengthwise >
When the original or copy has a “length” longer than
its “width,” we call it “lengthwise” and use symbol
“L” or “
.”
1139O1620A
<Crosswise >
When the original or copy has a “length” shorter
than its “width,” we call it “crosswise” and use
symbol “C” or “
.”
Intro2.fm Page xvi Tuesday, May 27, 2003 1:42 PM