/
Page 80
Setup Manual
E.4.2.8
Wireless LAN (LAN Interface)
Use the function
Wireless LAN (LAN Interface)
to define the parameters for the WLAN
adapter. Depending at the WLAN module which is integrated into the scanner, the values
for
IP Address
and
Default Gateway
can vary.
Note:
This menu is displayed only if a WLAN module is installed and if the settings for
IPv4 (Network Interface 1)
and
Wireless LAN (LAN Interface)
fit together.
Picture 70: Wireless LAN (LAN Interface)
The WLAN modules differ in the IP address which is available for communication.
The IP address which can be entered here must fulfil two criteria:
•
Only IP addresses for private networks are allowed.
•
The IP address of the WLAN module and the IP address range of the network, where
the scanner should be established, must not come in conflict.
IP Address
Enter the IP address of the WLAN module.
Subnet Mask
Enter the value for the subnet mask.
Default Gateway
Enter the value for the gateway.
After modifying the network parameters, click on the Apply button to transfer the new
settings to the scanner. The scanner is now accessible with its new IP address.
Summary of Contents for WideTEK 48
Page 1: ...Setup Manual ...
Page 2: ...File WT36 48 600_SetupManual_D docx ...
Page 17: ... Setup Manual Page 17 ...