Image Access WideTEK 48 Setup Manual Download

Page: 121 / 155

Setup Manual

Page 121

E.5.2

ICC Profiles

The section

ICC Profiles

is divided into the subsections

Scanner Profile

and

Printer Profiles

ICC profiles are integrated in the image file data.

First of all, download the respective ICC profile for the device to your local PC.

E.5.2.1

Scanner Profile

The ICC profile loaded at

Scanner Profile

adapts the color space between scanner and

image editing software.

Select

Scanner Profile

to upload an ICC profile to the scanner.

Already installed profiles will be displayed in a list.

Picture 104: Scanner Profile

Click the button to search the directories of your local PC and/or your
network for ICC profile files.

Send File

Click the button to load the selected file to the scanner.

After uploading, the ICC profile will be displayed.

Activating the ICC profile:

Select

ICC Profiles

in section

Quality

of the ScanWizard user interface.

Summary of Contents for WideTEK 48




























































































































































Search results

Summary of Contents for WideTEK 48

Reviews:

Related manuals for WideTEK 48

Brands by name

Popular brands

Image Access WideTEK 48, Setup Manual

Search results

Summary of Contents for WideTEK 48

Reviews:

Related manuals for WideTEK 48

Brands by name

Popular brands