Image Access WideTEK 48 Setup Manual Download

Page: 123 / 155

Setup Manual

Page 123

E.5.2.2

Printer Profiles

This function is temporarily not available. The screen shows the following message.

Picture 107: Printer profile status message

If this function is available, the ICC profiles for printers adapt the color space of the
scanner to the color space of the printer used with the scanner.

Select

Printer Profiles

to upload an ICC printer profile.

Picture 108: Printer Profiles

Click the button to search the directories of your local PC and/or your
network for ICC profile files.

Send File

Click the button to load the selected file to the scanner.

After uploading, the ICC profiles will be displayed.

Summary of Contents for WideTEK 48




























































































































































Search results

Summary of Contents for WideTEK 48

Reviews:

Related manuals for WideTEK 48

Brands by name

Popular brands

Image Access WideTEK 48, Setup Manual

Search results

Summary of Contents for WideTEK 48

Reviews:

Related manuals for WideTEK 48

Brands by name

Popular brands