Image Access WideTEK 48 Setup Manual Download

Page: 55 / 155

Setup Manual

Page 55

D.6.3

Preset Selection – Delete Preset

All presets can be deleted except the pre-installed presets

Easy

and

Expert

Select the preset to be deleted from the list.

Touch the

Delete Preset

button. The preset will be deleted.

The list of presets will not automatically refresh.

To refresh the list, return to the kiosk application (see D.6.5) and open the setup menu
again.

D.6.4

GUI Selection – Delete GUI

All applications can be deleted except the pre-installed application

EasyScan

Select the application to be deleted from the list.

Touch the

Delete GUI

button. The application will be deleted.

The list of applications will not automatically refresh.

To refresh the list, return to the kiosk application (press the

Home

button) and open the

setup menu again.

D.6.5

Back to the Kiosk Application

Tap the

Home

button.

The touchscreen returns to the kiosk application.

D.7

Returning to the Kiosk Application

Touching the

Home

button returns the touchscreen from the setup menu to

the Kiosk application menu.

Summary of Contents for WideTEK 48




























































































































































Search results

Summary of Contents for WideTEK 48

Reviews:

Related manuals for WideTEK 48

Brands by name

Popular brands

Image Access WideTEK 48, Setup Manual

Search results

Summary of Contents for WideTEK 48

Reviews:

Related manuals for WideTEK 48

Brands by name

Popular brands