Image Access WideTEK 48 Setup Manual Download Page 124

Page: 124 / 155

Page 124

Setup Manual

To delete the ICC profile, click on the “Delete” symbol in the line of the ICC
profile to be deleted.

To get information about the ICC profile, click on the information symbol in
the line of the ICC profile.

Picture 109: ICC profile information

Selecting the ICC profile to be used:

In the S2N user interface of the scanner click on the link

Options

below the button

Copy

The

Printer Preset

window opens. Click on Printing Enhancements .

Select

Color Matching



ICC Profile

The additional line

ICC Profile

is added to the menu below

Color Matching

Click on the selection arrow. All installed ICC profiles will be listed.

Select the desired ICC profile from the list.

Summary of Contents for WideTEK 48




























































































































































Search results

Summary of Contents for WideTEK 48

Reviews:

Related manuals for WideTEK 48

Brands by name

Popular brands

Image Access WideTEK 48, Setup Manual

Search results

Summary of Contents for WideTEK 48

Reviews:

Related manuals for WideTEK 48

Brands by name

Popular brands