/
Setup Manual
Page 21
A.7
Device Location
Note:
Picture 1 shows a sketch with a former version of the
WideTEK
®
36
. The
minimum distances around the scanner are also valid for the
WideTEK
®
48
.
Please allow a minimum of 150 mm (6 inch) from any side walls and 300 mm (12 inch)
from a back wall. Leave one meter (3 feet) minimum distance from any door or entrance
way. Use the illustration below as a guide.
Picture 1: Minimum distances
Do not operate the scanner in an area that has poor air circulation and/or that is not
ventilated.
Place the scanner on a flat and solid base. The load bearing capacity of the base must
correspond to the device weight.
Choose a location that complies with the temperature and humidity limits. Refer to the
technical specification.
Important:
Before using the scanner in the new environment, allow at least one hour for
temperature adaptation.
Temperature adaptation means:
A fast change from cold to warm environmental conditions can build up
condensation inside the housing. This will result in unfavorable scanned
images and could cause permanent damage to the unit.
Summary of Contents for WideTEK 48
Page 1: ...Setup Manual ...
Page 2: ...File WT36 48 600_SetupManual_D docx ...
Page 17: ... Setup Manual Page 17 ...