3
Ikusi Flow guide
1. INTRODUCTION
This document explains how to perform a basic installation of the Ikusi Flow headend.
The document is divided in two parts. In the first part, the physical mounting is described, both in rack mounting and in wall
mounting. The second part describes how to configure the headend. In order to do that, initially, it explains how to connect
the user configuration terminal (tablet, pc…) to Ikusi Flow. After that, it describes the steps that must be followed in order to
define a channel line-up, while mainly focusing on the Service wizard.
2. MOUNTING
Ikusi Flow can be installed both in a rack cabinet and in wall. Both types of installations are described below.
2.1 Rack cabinet mounting
When opening the box containing Ikusi Flow, you will find a set of modules, numbered from 1 to 5. Follow the order of
numbering for a correct installation.
Step 1: Install FLOW BASE
Extract FLOW BASE from the box numbered as
1
. The following figure describes the steps that must be followed in order to
install FLOW BASE in a rack cabinet
