21
Ikusi Flow guide
Push
button to advance to the next step.
Step 5: Output RF channels selection
.
This screen allows to select the output RF channels where the contents will be transmitted.
By default, the headend choose the output channels automatically, using the first ones that were declared as eligible. The
used channels will labelled with the
icon.
There are two reasons why a channel could be declared as non-eligible:
1. The headend has detected another signal in the installation that is using that channel, and, therefore, it could cause some
interference. Those channels are labelled with the
icon. You can relaunch the detection of external signals that has
not been generated by Ikusi Flow pushing the “SCAN” button.
2. The user has decided manually that channel should not be used. To do that, you must click over the channel. The channel
will become red and automatically the headend will leave to use it.
