Ikegami HDL-F3000, Operation Manual

Page: 34 / 70

● R CH H / G CH H / B CH H
● R CH V / G CH V / B CH V
■
WHITE CLIP
■
DTL
QUIT
M CLR H SAW
0
H PARA
0
(-100 to +100)
If the MENU switch is pressed
while any of “H SAW” or “H
PARA” is blinking, the value
Selecting “M CLR” makes the
system to be set back to the
factory setup.
WHITE SHADE
QUIT
M CLR V SAW
0
V PARA
0 (-100 to +100)
If the MENU switch is pressed
while any of “V SAW” or “V
PARA” is blinking, the value
below it can be changed.
Selecting “M CLR” makes the
system to be set back to the
factory setup.
WHITE SHADE
WHITE CLIP
QUIT
M CLR
(-100 to +100)
If the MENU switch is pressed
while any of “G,” “B,” or “R” is
blinking, the value below it can
be changed.
Selecting “M CLR” makes the
system to be set back to the
“M SET” value.
G
0
B
0
R
0
DTL
QUIT
M CLR
(-100 to +100)
If the MENU switch is pressed
while any of “GAIN” is blinking,
the value below it can be
changed.
Selecting “M CLR” makes the
system to be set back to the
“M SET” value.
GAIN
-40
5. OPERATION 5-8