Ikegami HDL-F3000, Operation Manual

Page: 52 / 70

MAIN MENU SUB MENU 1 SUB MENU 2 SELECT DEFAULT FUNCTION
ATW SETUP C.TEMP SETTING
BLUE QUIT Returns to the previous screen.
BLUE LIMIT AUTO
SET ON, OFF OFF Establishes the mode that can set the operating range
for the side with high color temperature.
BLUE LIMIT
CONTROL -100 to +100 0 Sets the operating range for the side with high color
temperature.
BLUE LIMIT INIT ON, OFF OFF Restores the default value.
ATW REFERENCE QUIT Returns to the previous screen.
ATW RED
REFERENCE -100 to +100 0 Adjust the red level for conversion.
ATE BLUE
REFERENCE -100 to +100 0 Adjust the blue level for conversion.
EXIT - - - Turns off the menu.
*** ENGINEER PAGE2 ***
MAIN MENU SUB MENU SELECT DEFAULT FUNCTION
NEXT PAGE - - - Moves to MENU PAGE4.
IRIS CIRCUIT ADJUST QUIT - - Moves from the sub menu to the main menu.
ADJUST MODE - - Automatically sets output for controlling the fixed iris value of the lens.
The control voltage values corresponding to F2.8 and F16 are set in
order to automatically adjust the relationship between the lens control
voltage value and lens iris value.
FILTER SETUP - ON, OFF OFF When it is set to ON, impresses the voltage to filter servo forcibly.
ND FILE SETUP MODE - ON, OFF OFF Creates ND FILE when set to ON, and AWB is executed at each ND
filter position.
ENGINEER SET FILE
RENEW QUIT - - Moves from the sub menu to the main menu.
DATA RENEW MODE - - Saves the camera level adjustments and menu item settings. The
saved data can be read as user-set data through “PRESET FILE
LOAD” of MENU PAGE6.
PROGRAM UPDATE CAMERA ROM READY, CANCEL,
EXECUTE - Updates the program software of the camera.
Operates while connecting the operation control panel (RCP-50, etc.)
with a memory card slot.
EXIT - - - Turns off the menu.
*** ENGINEER PAGE3 ***
MAIN MENU SUB MENU SELECT DEFAULT FUNCTION
NEXT PAGE - - - Moves to the camera menu (1/6).
SCAN FORMAT SELECT QUIT - - Moves from the sub menu to the main menu.
SCAN MODE 1080I59.
1080I50
1080P25SF
1080P29.SF
720P59
720P50 1080I59. Selects the operation format of the camera.
Only the format set to [ENABLE] on the SCAN FORMAT
ENABLE can be selected.
1080I59. : 1080/59.94i
1080I50 : 1080/50i,
1080P25SF : 1080/25psF
1080P29.SF : 1080/29.97psF
SCAN FORMAT ENABLE REMOTE CONTROL ENABLE, DISABLE ENABLE ENABLE : Enables the scanning format by the SCAN FORMAT SELECT
from the remote control panel.
DISABLE : Disables the scanning format by the SCAN FORMAT SELECT
from the remote control panel.
1080I59 ENABLE, DISABLE ENABLE Only the format set to [ENABLE] on the SCAN FORMAT ENABLE can
be selected.
To prevent the wrong operation, it cannot be operated from the remote
controller.
It can be operated only from the menu switch of the CCU.
1080I50 ENABLE, DISABLE ENABLE
1080P29.SF ENABLE, DISABLE ENABLE
1080P25SF ENABLE, DISABLE ENABLE
720P59 ENABLE, DISABLE ENABLE
720P50 ENABLE, DISABLE ENABLE
EXIT - - - Turns off the menu.
5. OPERATION 5-26