Ikegami CCU-890, Operation Manual

Page: 56 / 132

4.2 Power Supply
42
CCU-890 0804 VER2 (U) (E)
䂓
To Control Power ON/OFF from OCP (Remote Control)
You can control the power ON/OFF of both the camera head and the CCU from the OCP.
1
Connect the POWER CONT connector on the rear of CCU and the P.S CONT connector on the OCP via the
POWER CONT cable.
2
Set the MAIN POWER switch on the front of the CCU to "ON."
3
Set the POWER LOCAL/REMOTE switch on the front of the CCU to "REMOTE."
The power of the CCU is turned off.
4
Set the CAM POWER switch on the OCP to "ON."
The power of the CCU is turned on, and the power is simultaneously supplied to the camera head.
Note:
Some OCP does not have the P.S CONT connector. When an OCP that does not have the P.S CONT connector is used, only ON/OFF of
the power supply for the camera head is controlled without controlling the power ON/OFF of the CCU.
OCP
POWER CONT cable
P.S CONT connector
CCU rear view
POWER CONT connector
CAM POWER switch