Ikegami CCU-890, Operation Manual

Page: 82 / 132

5.1 Settings from the CCU Menu
68
CCU-890 0804 VER2 (U) (E)
䂓 Displaying the Submenu
You can perform various settings on the submenu that is displayed from the main menu on the PM screen.
1
Make sure that the main menu is displayed on
the PM screen.
2
Turn the MASTER PEDESTAL control knob or
IRIS control knob on the MCP to position the
fl ashing cursor on the setting item, and press the
CALL button.
The submenu appears, on which you can perform
various settings.
CAUTION:
Depending on the functions of the setting items, some items change the setting when the knob is turned; others change the setting when
the CALL button is pressed.
Note:
- To return to the main menu, select "QUIT" and press the CALL button.
- The fl ashing item on the submenu indicates the currently focused item. This fl ashing status is called the "flashing cursor" hereafter
(displayed in gray in the display example).
- Each time the CALL button is pressed, the flashing cursor switches to setting item -> mode selection -> setting item -> mode selection
and so on.
䂓 Exiting the Menu
This section explains how to exit the main menu/submenu on the PM screen.
1
Exit the menu screen in the following two ways:
a) Select "QUIT" on the CCU main menu and press the CALL button.
b) Press the BARS button.
The main menu/submenu disappears.
Mode
selection
Setting
item
ＱＵＩＴ
ＯＵＴ１ ＦＯＲＭＡＴ １０８０Ｉ５９．
ＯＵＴ２ ＦＯＲＭＡＴ １０８０Ｉ５９．
ＰＭ ＯＵＴ ＦＯＲＭＡＴ ＯＵＴ１
ＳＹＮＣ ＣＯＮＴ ＯＦＦ
ＨＤ ＯＵＴ Ｈ ＰＨＡＳＥ ０
ＨＤ ＯＵＴ Ｖ ＰＨＡＳＥ ０
ＰＭ ＤＩＳＰＬＡＹ１
ＰＭ ＤＩＳＰＬＡＹ２
ＨＤＴＶ ＣＯＮＴ（１／２）