Ikegami CCU-890, Operation Manual

Page: 46 / 132

3.3 DUAL LINK (HS TYPE) Specifi cation for the CCU
32
CCU-890 0804 VER2 (U) (E)
3.3 DUAL LINK (HS TYPE) Specifi cation for the CCU
To use the DUAL LINK (HS TYPE) specifi cation (optional) for a CCU, conditions ① through ③ among 4 conditions below must
be satisfi ed. In addition, the camera head connected to the CCU must have DUAL LINK (HS TYPE) specifi cation.
Condition ① : The E/O&O/E module is a dedicated optional board for DUAL LINK.
Condition ② : A second HDTV PROC module is mounted in the slot on the SDTV PROC module in the front of the CCU.
Condition ③ : A second HDTV OUT module is mounted in the slot on the SDTV OUT module at the rear.
Condition ④ : The VIDEO OUT module on the rear is a dedicated optional board for DUAL LINK.
(Condition ④ is not mandatory.)
When confi gurations for ① to ② and ④ are incomplete, it will be notifi ed by the self diagnostic information. For the self diagnostic
information, refer to "CCU Self Diagnostic Information" (page 106).
CAUTION:
The DUAL LINK (HS TYPE) CCU cannot multiplex audio signals to the following outputs.
• HD-SDI
• HD-SDI PM
• HD-SDI WFM
Note:
For the DUAL LINK (HS TYPE) CCU, a part of the CCU menu and the self diagnostic information is changed.