Ikegami CCU-890, Operation Manual, Page: 110 / 132

5.2 Settings Using Switches on the Module
96
CCU-890 0804 VER2 (U) (E)
5.2 Settings Using Switches on the Module
Depending on systems such as an external system connected to the CCU.
Tally Mode Settings
Set the mode of the tally control signal input to the TALLY IN connector on the rear of the CCU. Select the mode by S1 to S3
switches on the AUX-A module.
S1
S2 S3
POWER
⇔
MAKE
AUX-A Module (Side A)
Switch No. Function Name Setting Description
S1 R TALLY POWER Sets the R TALLY signal input to the CCU to "POWER mode."
MAKE Sets the R TALLY signal input to the CCU to "MAKE/BREAK mode."
S2 G TALLY POWER Sets the G TALLY signal input to the CCU to "POWER mode."
MAKE Sets the G TALLY signal input to the CCU to "MAKE/BREAK mode."
S3
*
Y TALLY POWER Sets the Y TALLY signal input to the CCU to "POWER mode."
MAKE Sets the Y TALLY signal input to the CCU to "MAKE/BREAK mode."
* Currently, S3 supports "MAKE" only.