Ikegami CCU-890, Operation Manual

Page: 97 / 132

5.1 Settings from the CCU Menu
CCU-890 0804 VER2 (U) (E)
83
VIDEO OUT CONT
VIDEO OUT CONT sets the signals output from the VIDEO OUT module on the rear of the CCU.
The submenu "VIDEO OUT CONT" is
displayed, on which you can perform various
settings.
ＱＵＩＴ
ＡＮＡＬＯＧ ＯＵＴ ＳＥＬ１ ＳＤＴＶ
ＡＮＡＬＯＧ ＯＵＴ ＳＥＬ２ ＧＢＲ
ＡＮＡＬＯＧ ＨＤＴＶ ＦＭＴ ＯＵＴ１
ＡＮＡＬＯＧ ＳＹＮＣ ＡＤＤ ＯＦＦ
ＳＹＮＣ ＯＵＴ ＳＥＬ １０８０Ｉ５９．
ＳＹＮＣ ＯＵＴ Ｈ ＰＨＡＳＥ ０
ＳＹＮＣ ＯＵＴ Ｖ ＰＨＡＳＥ ０
ＳＹＮＣ ２−３ＩＤ ＡＤＤ ＯＦＦ
ＷＦＭ ＯＵＴ ＳＥＬ
ＶＩＤＥＯ ＯＵＴ ＣＯＮＴ
The submenu "HD/DC/UC/VID/AUD CONT"
is displayed. Turn the MASTER PEDESTAL
control knob or IRIS control knob to position
the fl ashing cursor on "VIDEO OUT CONT,"
and press the CALL button.
ＱＵＩＴ
ＨＤＴＶ ＣＯＮＴ（１／２）
ＨＤＴＶ ＣＯＮＴ（２／２）
ＤＯＷＮ ＣＯＮＶ ＣＯＮＴ（１／３）
ＤＯＷＮ ＣＯＮＶ ＣＯＮＴ（２／３）
ＤＯＷＮ ＣＯＮＶ ＣＯＮＴ（３／３）
ＵＰ ＣＯＮＶ ＣＯＮＴ（１／２）
ＵＰ ＣＯＮＶ ＣＯＮＴ（２／２）
ＶＩＤＥＯ ＯＵＴ ＣＯＮＴ
ＡＵＤＩＯ ＣＯＮＴ
ＳＥＴＴＩＮＧ ＳＥＬＥＣＴ
ＨＤ／ＤＣ／ＵＣ／ＶＩＤ／ＡＵＤ ＣＯＮＴ
Turn the MASTER PEDESTAL control
knob or IRIS control knob to position
the fl ashing cursor on the submenu
"HD/DC/UC/VID/AUD CONT," and press
the CALL button.
ＱＵＩＴ
ＢＡＲＳ ＴＩＴＬＥ
ＨＤ／ＤＣ／ＵＣ／ＶＩＤ／ＡＵＤ ＣＯＮＴ
ＲＥＴ ＶＩＤＥＯ ＦＯＲＭＡＴ
ＩＮＦＯＲＭＡＴＩＯＮ
ＯＴＨＥＲＳ
−−− ＯＰＥ． ＧＵＩＤＥ −−−
ＳＥＬＥＣＴ ： （ＳＥＬ） ＫＮＯＢ
ＳＥＬＥＣＴ ： （ＮＥＸＴ） ＫＮＯＢ
ＥＮＴＥＲ ： （ＥＮＴＥＲ） ＫＥＹ
＊＊＊ ＣＣＵ−８９０ ＭＥＮＵ ＊＊＊
Setting Item Set Value Description
ANALOG OUT SEL1 HDTV Sets the analog component output to "HDTV."
SDTV Sets the analog component output to "SDTV."
ANALOG OUT SEL2 GBR Sets the analog component output to "GBR."
YPbPr or YCbCr Sets the analog component output to "YPbPr" (when "HDTV" is selected) or "YCbCr"
(when "SDTV" is selected).
ANALOG HDTV FMT OUT1 Sets the same format as HD-SDI output1 when "HDTV" is set to the analog
component output.
OUT2 Sets the same format as HD-SDI output2 when "HDTV" is set to the analog
component output.
ANALOG SYNC ADD (HDTV
selected)
(GBR
selected) OFF Sets not to add tri-sync signals to all the analog HDTV RGB output.
ON Sets to add tri-sync signals to all the analog HDTV RGB output.
(YPbPr
selected) Y ONLY Sets to add tri-sync signals only to the Y signal among the analog HDTV YPbPr output.
ALL Sets to add tri-sync signals to all the analog HDTV YPbPr output.
(SDTV
selected) (GBR
selected) OFF Sets not to add tri-sync signals to all the analog SDTV RGB output.
ON Sets to add tri-sync signals to all the analog SDTV RGB output.
(YCbCr
selected) Y ONLY Sets to add tri-sync signals only to the Y signal among the analog SDTV YCbCr output.
SYNC OUT SEL
*1
1080I59. The synchronization signal for the external synchronization output associates with
the "1080I59.94" format.
1080P23.SF The synchronization signal for the external synchronization output associates with
the "1080P23.97 segment frame" format.
1080P23. The synchronization signal for the external synchronization output associates with
the "1080P23.97" format.
720P59. The synchronization signal for the external synchronization output associates with
the "720P59.94" format.
SDTV The external synchronization output becomes the SDTV synchronization signal.
SYNC OUT H PHASE
*2
Adjusts the horizontal phase of external synchronization output.
SYNC OUT V PHASE
*2
Adjusts the vertical phase of external synchronization output.
SYNC 2-3ID ADD
*3
OFF Sets not to embed pulse signals, which counted 1 to 5 frames, in the SYNC output.
ON Sets to embed pulse signals, which counted 1 to 5 frames, in the SYNC output.
WFM OUT SEL - Sets the WFM outputs.