Ikegami CCU-890, Operation Manual

Page: 35 / 132

2.2 CCU-890 Rear View
CCU-890 0804 VER2 (U) (E)
21
䂓㩷 VIDEO OUT Module
6
7
8
6. Component output connectors
Output GBR signals or Y + color-difference signals.
When "HDTV" is selected from "ANALOG OUT SEL1" setting of the CCU menu "VIDEO
OUT CONT," HDTV GBR or YCbCr signals are output. When "SDTV" is selected, SDTV GBR
or YPbPr signals are output. In the same way, GBR signals or Y + color-difference signals can
be selected from "ANALOG OUT SEL2" setting of the CCU menu "VIDEO OUT CONT."
7. SYNC OUT connector
Outputs signals for external synchronization.
HDTV Tri-Sync signal or SDTV synchronization signal is selected from "SYNC OUT SEL"
setting of the CCU menu "VIDEO OUT CONT."
8. WFM OUT connectors
Output video signals for the waveform monitor (2 channels).
The HD-SDI signal, SD-SDI signal, or SDTV analog signal can be selected as the output signal.
(First and second channels can be selected separately.)
Select the signal from "WFM OUT1" and "WFM OUT2" of the CCU menu "VIDEO OUT
CONT."
䂓㩷 HD RET IN Module
HD
9
10
9. HD-SDI RET IN connectors
Input return signals to the camera head (4 channels).
Supports HD-SDI signals. Active through connection is not available.
Note:
When "ON" is selected from "FRAME SYNCHRO" of the CCU menu "RET VIDEO FORMAT,"
2 channels are used for the input. In this case, the input to the third and fourth channels is
disabled.
10. QTV IN connectors
Input QTV signals to be transmitted to the camera head (2 channels).
Format is SDTV analog composite signal.