Ikegami CCU-890, Operation Manual

Page: 31 / 132

2.2 CCU-890 Rear View
CCU-890 0804 VER2 (U) (E)
17
2.2 CCU-890 Rear View
This section explains the names and functions of the parts on the rear of the CCU-890.
HD
⑤
TALLY OUT connector
CAMERA connector
④
①
②
Fan motor
③
⑧ RS422 TRUNK connector (option)
⑨
WFM REMOTE connector
⑩ SCAN CONT connector
⑪ DIGITAL AUDIO connector
⑫ INTERCOM connector AUDIO TRUNK connector ⑬
MIC OUT connectors ⑭
⑮
⑥ TALLY IN connector
⑦
AUX connector
CB I/F connectors ⑯
Group of modules
GROUND
terminal
POWER CONT
connector
AC INPUT
connector
* Depending on the specifi cation, ⑯ CB I/F connectors (optional) changes to the TRIAX connector or blank.
①
GROUND terminal
Frame ground terminal of the CCU power unit.
② POWER CONT connector
This connector is connected to the P.S CONT connector on the OCP via the POWER CONT cable to control ON/OFF of the CCU
main power and the power of the camera head from the OCP. In this case, set the POWER LOCAL/REMOTE switch on the front of
the CCU to "REMOTE."
Some OCPs do not have the P.S CONT connector.
③ Fan motor
Fan motor to cool inside of the CCU.
④ CAMERA connector
Connector to connect the camera head via camera cable.
⑤ TALLY OUT connector
Outputs TALLY signals for monitor.