Ikegami CCU-890, Operation Manual, Page: 81 / 132

5.1 Settings from the CCU Menu
CCU-890 0804 VER2 (U) (E)
67
5.1 Settings from the CCU Menu
The menu operation for the CCU-890 is performed from the MCP or OCP. The setting of each item is performed by displaying the
main menu/submenu screen on the PM screen.
Basic Operation of the Menu (Operation from the MCP)
The menu operation for the CCU-890 is performed from the MCP. The setting of each item is performed by displaying the main
menu/submenu on the Picture Monitor (PM).
REF
SAVE LOAD
JOB
START MAN SET
SCENE
M. CARD
ENABLE
SNAP
SHOT FILE
CLR
DIAGNOS EFFECT
SCREEN
16 : 9
BARS button
Special Function part
SPECIAL button
MASTER PEDESTAL
control knob
CALL button
IRIS control knob
SPECIAL button/BARS button :
Pressing the SPECIAL button then pressing the BARS button will switch to the
menu mode and display the menu.
CALL button : Pressed to confi rm the selection and setting.
MASTER PEDESTAL control knob/IRIS
control knob
: Used to select a setting item.
䂓 Displaying the Main Menu
This section explains how to display the main menu on the PM screen.
1
Press the SPECIAL button on the MCP.
2
Press the BARS button.
The main menu appears on the PM screen.
Note:
The fl ashing item on the main menu indicates the currently focused item. This fl ashing status is called the "fl ashing cursor" hereafter
(displayed in gray in the screen example).
ＱＵＩＴ
ＢＡＲＳ ＴＩＴＬＥ
ＨＤ／ＤＣ／ＵＣ／ＶＩＤ／ＡＵＤ ＣＯＮＴ
ＲＥＴ ＶＩＤＥＯ ＦＯＲＭＡＴ
ＩＮＦＯＲＭＡＴＩＯＮ
ＯＴＨＥＲＳ
−−− ＯＰＥ． ＧＵＩＤＥ −−−
ＳＥＬＥＣＴ ： （ＳＥＬ） ＫＮＯＢ
ＳＥＬＥＣＴ ： （ＮＥＸＴ） ＫＮＯＢ
ＥＮＴＥＲ ： （ＥＮＴＥＲ） ＫＥＹ
＊＊＊ ＣＣＵ−８９０ ＭＥＮＵ ＊＊＊