Draco vario
DisplayPort
1.2
Summary of Keyboard Commands
83
9.2 Managing of the EDID and USB-HID Ghosting
9.2.1 EDID
Keyboard command
Function
Hot Key, a
Download the EDID of a monitor connected to the CON Unit into the CPU Unit.
9.2.2 USB-HID Ghosting
Keyboard command
Function
Hot Key, h, w, Enter
Write the device descriptions of the input devices connected to the CON Unit
into the CPU Unit. Activate the emulation of these device descriptions in the
CPU Unit.
Hot Key, h, e, Enter
Activate the emulation of already stored device descriptions in the CPU Unit.
Hot Key, h, d, Enter
Deactivate the emulation of active device descriptions in the CPU Unit. The
input devices connected to the CON Unit will be now passed transparently to the
source.
Hot Key, h, r, Enter
Deactivate the emulation of active device descriptions in the CPU Unit. Deletes
the descriptions out of the CPU Unit. The input devices connected to the
CON Unit will be now passed transparently to the source.
9.3 Switching
9.3.1 Switching of Sources for CON Units with local Input
Keyboard command
Function
Hot Key, k, 1, Enter
Switch to the extender module connection 1
Hot Key, l, Enter
Switch to the local source
* For switching of redundant CON Units, see chapter 8.4, page 81.
9.3.2 Switching of Video Channels in Dual-Head Systems
Keyboard command
Function
Hot Key, d, 1, Enter
Switch to video channel 1 of the Dual-Head CPU Unit (only L483-/L493-B2Hx)
Hot Key, d, 2, Enter
Switch to video channel 2 of the Dual-Head CPU Unit (only L483-/L493-B2Hx)
9.3.3 Switching of two different CPU Units via redundant CON Unit
Keyboard command
Function
Hot Key, k, 1, Enter
Switch to the extender module connection 1
Hot Key, k, 2, Enter
Switch to the extender module connection 2
* Switching of redundant CON Units via a keyboard on an add-on module with USB-HID interface is only
available for an extender module connection via matrix, not for a point-to-point connection, see
