Draco vario
DisplayPort
1.2
Access Option
65
5.1 Command Mode
To start the command mode, use a keyboard sequence (Hot Key) at the keyboard of a CON Unit plugged in
a KVM device. The command mode can also be called up using a keyboard with USB-HID interface
connected to an add-on module.
To exit the command mode, press Esc.
NOTICE
While in command mode,
the
Caps Lock
and
Scroll Lock
LEDs on the keyboard are flashing,
the USB-HID devices are not operable, mouse and keyboard functions are deactivated,
only selected keyboard commands are available.
If there is no keyboard command entered within 10 seconds after activating the command mode, it will be
deactivated automatically.
The following keyboard commands are used to enter, and to exit the command mode, and to change the
Hot Key.
Function
Keyboard command
Start the command
mode
2x Left Shift (Hot Key, factory setting)
Exit the command
mode
Esc and also Left Shift + Esc, if necessary
Change the Hot Key
current Hot Key, c, new Hot Key Code, Enter
NOTICE
In a combined KVM matrix/U-switch configuration, select different Hot Keys for the connected extender
modules, e.g., 2x Left Shift for access to the matrix and e.g., 2x Right Shift for access to the U-Switch.
Hot Keys currently can only be changed at the console and only for that console.
Hot Key Code
The Hot Key to start the command mode can be changed. The following table lists the Hot Key codes for
the available Hot Keys.
Hot Key Code
Hot Key
0
Freely selectable, except Esc, Del and Enter
2
2x Scroll
3
2x Left Shift (default)
4
2x Left Ctrl
5
2x Left Alt
6
2x Right Shift
7
2x Right Ctrl
8
2x Right Alt
