Draco vario
DisplayPort
1.2
Installation
67
6
Installation
NOTICE
Please verify that interconnect cables, interfaces, and handling of the devices comply with the
requirements (see chapter 10, page 84).
First-time users are recommended to set up the system in a test environment that is limited to a single
room. This makes it easier to identify and solve any cabling problems, and experiment with your system
more conveniently.
6.1 Setting up the System
6.1.1 Setting up the Extender Module
Switch off all devices.
Installing the CON Unit
1. Connect the monitor(s), keyboard, and mouse to the CON Unit.
2. Connect the CON Unit to the power supply unit(s)/power socket(s).
Installing the CPU Unit
1. Connect the source to the CPU Unit with the supplied cables. Please ensure the cables are not
strained.
2. Connect the CPU Unit to the power supply unit(s)/power socket(s).
Establishing a Point-to-Point Connection of CON Unit and CPU Unit and Powering on the system
1. Connect the CON Unit to the CPU Unit by using an interconnect cable.
2. Power up the system, following the recommended sequence:
Monitor - CON Unit - CPU Unit - source
3. Boot the source and check that everything works correctly.
Establishing a matrix connection of CON Unit and CPU Unit is described in the respective Draco tera matrix
manual.
