Ihse Draco vario ultra DisplayPort 1.2 Manual Download Page 109

Page: 109 / 128

Draco vario

DisplayPort

1.2

Technical Data

109

Configuration of the Sample Rate

The sample rate of the balanced audio interface can be configured individually.

•

The default sample rate is 48.0 kHz.

•

The sample rate can be configured in the

Config.txt

file of the extender module with the balanced

audio CPU module. Therefore, the respective parameter

SRC

has to be entered into a new line. If there

is not entered any parameter, the sample rate 48.0 kHz will be used. The following additional sample
rates can be configured:

−

32.0 kHz (enter

SRC32000

Config.txt

file)

−

44.1 kHz (enter

SRC44100

Config.txt

file)

−

88.2 kHz (enter

SRC88200

Config.txt

file)

−

96.0 kHz (enter

SRC96000

Config.txt

file)

−

176.4 kHz (enter

SRC176400

Config.txt

file)

−

192.0 kHz (enter

SRC192000

Config.txt

file)

Compatibility

Extender modules with balanced audio interface are compatible to extender modules with digital audio
interface regarding the transmission of the audio standard 2-channel PCM.

•

The compatibility shall be applied to the add-on module digital audio and the extender modules of the

481/491 and 483/493 series.

•

The compatibility is regardless of the input or output side, this means that a digital audio input is

compatible to a balanced audio output and vice versa.

Specification Balanced Audio

Parameter

Value

Bit depth

24 bit

Sample rate

32 to 192 kHz

Input signal level

Max. 6.4 dBu balanced (Gain: 0 dB)
Max. 0.4 dBu unbalanced (Gain: 0 dB)

Output signal level

8.1 dBu (balanced)
2.1 dBu (unbalanced)

Phantom power

48 V DC

Pre-amplification

10 to 65 dB

CPU Unit (Inputs)

2x 6.35 mm stereo jack plug

CON Unit (Outputs)

2x 6.35 mm stereo jack plug

Summary of Contents for Draco vario ultra DisplayPort 1.2

































































































































Search results

Summary of Contents for Draco vario ultra DisplayPort 1.2

Reviews:

Brands by name

Popular brands

Ihse Draco vario ultra DisplayPort 1.2, Manual

Search results

Summary of Contents for Draco vario ultra DisplayPort 1.2

Reviews:

Brands by name

Popular brands