Maintenance
Draco vario
DisplayPort
1.2
92
6. Optionally: copy the stored
Config.txt
file from the local directory and paste it to the flash drive of
the extender module.
7. Manually power off the extender module after copying all required firmware files.
8. Remove the Mini-USB cable from the extender module.
9. Power on the extender module.
The extender module starts automatically with the new firmware.
10.2.3 Updating the Firmware of Add-on Modules
The most add-on modules can be updated via the Mini-USB service port by copy & paste.
Add-on Modules USB 2.0
Both CON Units and CPU Units for embedded as well as 480 Mbit/s can be updated via their own Mini-USB
interface.
To update a CON USB 2.0 module (add-on or stand-alone module), proceed as follows:
1. Connect the USB 2.0 module to any source using a Mini-USB cable.
The USB 2.0 module opens a flash drive containing the
Config.txt
file.
2. Delete the USB firmware on the flash drive.
3. Manually power off the USB 2.0 module.
4. Power on the USB 2.0 module.
The USB 2.0 module starts automatically.
5. Copy the
REX_xx.pfw
file to the USB 2.0 module.
6. Manually power off the USB 2.0 module.
7. Power on the USB 2.0 module.
The USB 2.0 module starts automatically with the new firmware.
To update a CPU USB 2.0 module (add-on or stand-alone module), exactly repeated this process for the
CPU USB 2.0 unit with the
TEX_xx.pfw
file.
Analog Add-on Modules
Analog audio add-on modules cannot be field-updated via Mini-USB interface or matrix. They need to be
factory programmed. However, a firmware update is usually not necessary. If you have any questions about
updating add-on modules, please contact the manufacturer's technical support.
