Description
Draco vario
DisplayPort
1.2
26
4.6.3 Extender Modules with Local Input/Output
Product type
Connection
Redundancy
DisplayPort USB-HID Local Mini
DisplayPort
L490-BPHCXL
Cat X 3G
Not redundant
1x
2x
Output
R490-BPHCXL
Input
L490-BPHCXLR
Redundant
Output
R490-BPHCXLR
Input
L490-BPHXL
Single-mode fiber 1G
Not redundant
1x
2x
Output
R490-BPHXL
Input
L490-BPHXLR
Redundant
Output
R490-BPHXLR
Input
4.6.4 Supplementary with Extended Function for Extender Modules
To monitor all function- and safety-critical components of extender modules and add-on modules of a
chassis, SNMP modules installed in the same chassis can be used.
SNMP modules can be used to query the status of the extender modules, configure extender module
settings, and query and update the firmware of the extender modules and add-on modules. For more
information, please refer to the SNMP manual.
Part number
Description
474-SNMP
SNMP module for sliding-in into the chassis 474-BODY6BP (slot 5),
474-BODY6BPF (slot 5) and 474-BODY21/4U (slot 21).
The transmission of the traps is unencrypted (SNMP v1).
474-SNMPV3
SNMP module for sliding-in into the chassis 474-BODY6BP (slot 5),
474-BODY6BPF (slot 5) and 474-BODY21/4U (slot 21).
The transmission of the traps is unencrypted (SNMP v3).
Extender modules can be combined with a U-Switch module that can seamlessly control multiple sources
as one source using just a single set of keyboard and mouse, while the video outputs of the sources are
directly connected to the monitors. For more information, please refer to the Draco U-Switch manual.
Part number
Description
B476-4U4T
Draco vario U-Switch Module 4-Port USB-HID + USB 2.0
4.6.5 Add-on Modules
Add-on Modules USB 2.0 and USB-HID
Part. No.
Description
L474-BXE
Add-on module with 2x USB 2.0 embedded (up to 36 Mbit/s)
R474-BXE
L474-BXE2
Add-on module with 4x USB 2.0 embedded (up to 50/100 Mbit/s)
R474-BXE2
L474-BXH
Add-on module with 2x USB-HID
R474-BXH