Ihse Draco tera flex Cat X 1G K480-C120 User Manual Download Page 47

Page: 47 / 335

Draco tera flex

Access Options

The following keyboard commands are used to enter, and to exit the command mode, and to change the
Hot Key.

Function

Keyboard command

Enter command mode
(default)

2x <Left Shift>

(Hot Key)

Exit command mode

<Esc>

Change Hot Key

Hot Key Code

The Hot Key to enter the command mode can be changed. The following table lists the Hot Key codes for
the available Hot Keys.

Hot Key Code

Hot Key

Freely selectable

2x <Scroll>

2x <Left Shift>

2x <Left Ctrl>

2x <Left Alt>

2x <Right Shift>

2x <Right Ctrl>

2x <Right Alt>

NOTICE

In a combined KVM matrix/U-Switch configuration, select different Hot Keys for extender modules
connected to the KVM matrix (e.g.,

2x <Left Shift>

) and the U-Switch (e.g.,

2x <Right

Shift>

Set freely selectable Hot Key (exemplary)

To set a freely selectable Hot Key (e.g.,

2x <Space>

), use the following keyboard sequence:

Set Hot Key for direct OSD access

Next to the Hot Key for standard functions, a second Hot Key can be exclusively set for opening the OSD
directly.

To select a Hot Key from the Hot Key table for a direct opening of the OSD, use the following keyboard
sequence:

To select a freely selectable Hot Key (e.g.,

<Space>

) for opening OSD directly, use the following keyboard

sequence:

Delete Hot Key for direct OSD access

To delete the Hot Key for direct OSD access, use the following keyboard sequence.

Reset Hot Key

To set a Hot Key back to default settings, press the key combination

within

5 s after plugging in a keyboard.

Summary of Contents for Draco tera flex Cat X 1G K480-C120
















































































































































































































































































































































Search results

Summary of Contents for Draco tera flex Cat X 1G K480-C120

Reviews:

Related manuals for Draco tera flex Cat X 1G K480-C120

Brands by name

Popular brands

Ihse Draco tera flex Cat X 1G K480-C120, User Manual

Search results

Summary of Contents for Draco tera flex Cat X 1G K480-C120

Reviews:

Related manuals for Draco tera flex Cat X 1G K480-C120

Brands by name

Popular brands