Ihse Draco tera flex Cat X 1G K480-C120 User Manual Download Page 101

Page: 101 / 335

Draco tera flex

Configuration via OSD

101

The following functions are available:

Button

Function

New G.

Create a new CPU Group

Edit

Edit an existing CPU Group

Delete

Delete an existing CPU Group

Cancel

Reject changes

Okay

Apply changes

The following parameters can be configured:

Field

Entry

Description

Text

Ident number of the CPU Group

Name

Text

Name of the CPU Group

Member of Group

Selection

Assign the CPU Device to a group

Group

Automatically set if the CPU Device is assigned to a CPU Group

Function not active (default)

Further parameters are described in chapter 7.7.1, page 98.

To create a CPU Group, proceed as follows:

1. Select

Configuration > CPU Devices

in the main menu.

2. Click the

New G.

button.

3. Enter a CPU Group name into the field

Name

4. Click the

Okay

button.

The CPU Group is created now.

To assign a CPU Device to a group, proceed as follows:

1. Select

Configuration > CPU Devices

in the main menu.

2. Select the CPU Device you want to assign to a CPU group.

3. Select the CPU Group for the assignment in the field

Member of Group

using the cursor up and down

keys.

4. Click the

Okay

button.

The CPU Device is assigned to the CPU Group now.

Summary of Contents for Draco tera flex Cat X 1G K480-C120
















































































































































































































































































































































Search results

Summary of Contents for Draco tera flex Cat X 1G K480-C120

Reviews:

Related manuals for Draco tera flex Cat X 1G K480-C120

Brands by name

Popular brands

Ihse Draco tera flex Cat X 1G K480-C120, User Manual

Search results

Summary of Contents for Draco tera flex Cat X 1G K480-C120

Reviews:

Related manuals for Draco tera flex Cat X 1G K480-C120

Brands by name

Popular brands