Ihse Draco MultiView 4K60 MV42 Series, User Manual, Page: 37 / 108

Draco Multiview 4K60 Configuration via OSD
37
5 Configuration via OSD
NOTICE
Possible losss of configuration changes
By pressing the Okay button to apply changes to the active configuration, changes are saved in
the volatile memory of the Draco MV. In the event of a sudden power failure, these changes
would be lost. To save changes permanently:

Save the changed configuration as an active ( Save ) or as a predefined configuration
( Save as… ) (from chapter 5.6) or perform a restart (see chapter 7.6.2, page 94).
NOTICE
A change in system-relevant parameters (e.g. change in the IP address) is immediately
displayed in the OSD. To initialize system-relevant configuration changes on the Draco MV, the
Draco MV must be restarted. The restart of the Draco MV may take several minutes, and the
Draco MV is not available during the restart.
5.1 Log in to the OSD
Requirements:

You have opened the OSD and you are in the main menu.
All configuration settings require a login with administrator rights.

For administrator access to the configuration menu, log in with the following login data:
Field Entry
User admin
Password admin
NOTICE
For security reasons, please change the administrator password as soon as possible (see
chapter 5.4, page 47).
1. Press key
<F10>
in the main menu of the OSD.
The login mask opens.
2. Enter the login data of the administrator.
Fig. 26 Menu Configuration - Login