Configuration via OSD
Draco Multiview 4K60
52
To save the created configuration to a specific memory location, proceed as follows:
1. Select
Configuration > Save As…
in the main menu.
2. Select the required storage location (
File #1
to
File #8
) or
Default
.
The current configuration will be saved to this storage location and will be shown immediately
in the menu. The previously saved configuration saved to this storage location is deleted.
5.6.3 Load Configurations
Previously saved configurations are loaded in this menu. In
Active
, the currently loaded
configuration is displayed. To replace the current configuration through another configuration, in
addition to the default configuration (
Default
), one from up to eight further, personalized
configurations (
File #1
to
File #8
) can be loaded.
Fig. 38 Menu
Configuration - Open...
To load a previously saved configuration, proceed as follows:
1. Select
Configuration > Open
in the main menu.
2. Select the desired configuration.
3. Press the
Okay
button to load the selected configuration.
The selected configuration is immediately loaded and displayed in the menu as
Active
. The
previously active configuration is overwritten.