Specifications
Draco Multiview 4K60
98
8.1.6 GPIO Port
An external keypad with up to four buttons, each of which one associated LED can be connected
to this interface. After pressing a button, the corresponding source is switched. The switching
carried out is indicated on the associated LED. E.g. button 1 is assigned to the USB-B port for
source 1. Max. 50 mA is supplied at the port for the power supply.
8.1.7 RJ45 (Interconnect)
Communication between Cat X devices requires a 1000BASE-T connection.
Connector wiring must comply with EIA/TIA-568-B (1000BASE-T), with RJ45 connectors at both
ends. All four cable wire pairs are used
8.1.8 3,5 mm Audio Interface (Optical Digital / Analog)
The Draco MV with optical-digital audio interface supports the unidirectional transmission of
digital audio data. This is a combined interface that can output both digital and analog. The output
can be either digital or analog at any moment.
Up to four sources can be connected to the Draco MV. The audio data of all sources will be
transmitted to the Draco MV at the same time, but only the audio signal of the active source will
be provided at the audio output.
Specifications digital audio
Parameters
Values
Compatibility
S/PDIF, EIAJ RC-5720B, JIS C 6560
Standards
PCM
Bit depth
24 bit
Sample-Rate
32 to 96 kHz
Connection
Coaxial (S/PDIF; Cinch)
Optical (S/PDIF)
Specifications analog-audio
Parameters
Values
Standards
Digitized virtually CD quality audio
Bit depth
24 bit
Sample-Rate
Up to 192 kHz
Signal Level
Line-Level (5 Volt Pk-Pk maximum)
Connection
2x 3.5 mm stereo jack plug (audio output)