manualshive.com logo in svg

Ignite Auger 75 DDH, Operation & Maintenance Manual

The Ignite Auger 75 DDH is a powerful drilling machine, designed for durability and efficiency. To ensure optimal performance and longevity, make sure to refer to the Operation & Maintenance Manual, available for free download from manualshive.com. This comprehensive manual provides step-by-step instructions and essential tips for hassle-free handling and maintenance.

Share
Download
background image

49

A

approved loaders ......................................................15
assembling and disassembling

chain reduction drives ............................................34

assembly..................................................................12
attachment identification ..............................................4
attachment signs

decals .....................................................................9

attachment storage ...................................................37
auger bit

installing and removing...........................................12

C

call before you dig .......................................................5
connecting hydraulic hoses ........................................20

D

daily inspection

machine quick coupler............................................14
mounting frame .....................................................14

dimensions of the auger

specifications.........................................................38

E

entering and exiting the machine ................................16

F

fastening the attachment on a trailer ...........................25
features and accessories

optional items ..........................................................4
standard items.........................................................4

fire prevention

electrical .................................................................6
fire extinguishers .....................................................7
fueling.....................................................................7
hydraulic system ......................................................6

first time installation ...................................................20
flammable fluids ..........................................................6

G

grinding safety ............................................................7

H

hydraulic connection specifications

push to connect fittings...........................................45

hydraulic quick couplers

with loaders ..................................................... 21–22

I

installing attachment

non-powered machine quick coupler .......................16
powered machine quick coupler ..............................18

installing hydraulic hoses ...........................................12

L

lifting the attachment .................................................25
lubricating the auger

lubrication locations ...............................................31

M

maintenance safety .....................................................6
moving with the auger installed

loader ...................................................................23

O

operating the controls

loader ...................................................................22

operation of the auger

loader ...................................................................22

P

publications and training resources...............................8

R

removing and installing hydraulic motor and gear box

hydraulic motor ......................................................33

removing and installing light / standard duty auger points

and teeth

auger teeth............................................................32

removing attachment

non-powered machine quick coupler .......................23
powered machine quick coupler ..............................24

return to service ........................................................37

S

safety rules .................................................................5
serial number

location ...................................................................3

service schedule

maintenance .........................................................30

silica dust exposure

avoiding ..................................................................6

spark arrester exhaust system safety............................7
specifications

capacities..............................................................39
flare fitting .............................................................42
o-ring face seal connection .....................................42
o-ring flare fitting ....................................................43
performance ..........................................................39
port seal fitting .......................................................45
straight thread o-ring fitting .....................................42
torque for general metric bolts.................................40
torque for general sae bolts ....................................40
tubelines and hoses ...............................................42

starting safety .............................................................7

T

transporting the attachment and machine on a trailer ...26

ALPHABETICAL INDEX

Summary of Contents for Auger 75 DDH























































Reviews:

No comments

Related manuals for Auger 75 DDH

Fein FMM350Q Manual preview
FMM350Q
Brand: Fein Pages: 43
Fein AFSC18Q Original Instructions Manual preview
AFSC18Q
Brand: Fein Pages: 166
T-Drill T-35 Instruction Manual preview
T-35
Brand: T-Drill Pages: 49
Graco 249421 Instructions preview
249421
Brand: Graco Pages: 2
MasterForce 243-1490 Operator'S Manual preview
243-1490
Brand: MasterForce Pages: 4
Avdel 7557 Instruction Manual preview
7557
Brand: Avdel Pages: 20
OEM Tools 24820 Operating Instructions And Parts Manual preview
24820
Brand: OEM Tools Pages: 8
Greenlee GATOR CUAP32GL Instruction Manual preview
GATOR CUAP32GL
Brand: Greenlee Pages: 16
Stihl 4910-500-1800 Instruction Manual preview
4910-500-1800
Brand: Stihl Pages: 36
DAJ PEGD8016 User Manual preview
PEGD8016
Brand: DAJ Pages: 10
Hewlee HL-300B Instruction Manual preview
HL-300B
Brand: Hewlee Pages: 8
Qonnect AS N-12-R Operating Instructions preview
AS N-12-R
Brand: Qonnect Pages: 4
Universal Tool UT1040S Operating Instructions preview
UT1040S
Brand: Universal Tool Pages: 2
Hilti DC-EX 125/5"M Manual preview
DC-EX 125/5"M
Brand: Hilti Pages: 112
RHINO Pro 300940 Owner'S Manual preview
Pro 300940
Brand: RHINO Pages: 12
9circle 9CL-1100622 Instruction Manual preview
9CL-1100622
Brand: 9circle Pages: 7
Hitachi Koki FCJ 65S3 Handling Instructions Manual preview
FCJ 65S3
Brand: Hitachi Koki Pages: 54
Craftex CT180 User Manual preview
CT180
Brand: Craftex Pages: 24

Brands by name

Popular brands

Load more brands