71
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
6.7.2.
Enlarged View
You have the option of displaying a magnified setup interface on your screen. This was developed for users
with impaired vision.
Activate
Zoom
in the
Display
(page 69) window.
1.
The
Virtual Resolution
selection field will become active.
Figure 18: Set resolutions
Under
Virtual Resolution
and
Resolution
, the current resolution value is preset as the default
value.
Configure the following settings for the magnification function:
2.
-
Under
Virtual Resolution
, select the highest possible value from the selection list.
-
Under
Resolution
, select a much lower value which should simulate the actual resolution of the
screen.
The setup interface is now shown as if it would fill a much larger screen. The existing screen thus shows just
part of the interface. Essentially, it functions like a magnifying glass or a peephole. The part of the interface
that can be seen is highly magnified.
If you selected
Mirror Displays
under the advanced settings, all active screens will be displayed
in the same way. They basically lie over each other. However, you can change the way they are
displayed in magnification mode by reducing the actual resolution of the mirrored screen.
