45
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
Tabs
Menu path:
Setup > Sessions > Browser > Browser Global > Tabs
In this area, you can define settings for the browser tabs.
You can change the following settings:
•
New pages should be opened in
: Specifies how links to new pages are to be opened.
-
the current window
: The page will open in the current window even if the link defines a new
window as the target.
-
a new window
: If the link does not define a target, the page will open in the current window. If the
link defines a new window as the target, the page will open in a new window.
-
a new tab
: If the link does not define a target, the page will open in the current window. If the link
defines a new window as the target, the page will open in a new tab.
•
Warn me when closing mutliple tabs
: If this option is enabled, a warning will be shown as soon as you
attempt to close a browser window with a number of tabs.
•
Warn me when opening multiple tabs might slow down the browser
: If this option is enabled, a
warning will be shown as soon as you open a very large number of tabs.
•
When a link is opened in a new tab, switch to it immediately
: If this option is enabled, the focus will
switch to the new tab when a new tab is opened by a link. If this option is disabled, the focus will be
retained when a new tab is opened by a link.
Content
Menu path:
Setup > Sessions > Browser > Browser Global > Content
In this area, you can change settings regarding popups, JavaScript, downloads and the browser display.
•
Block pop-up windows
: If this option is enabled, websites will be prevented from automatically
opening popups. With
Exceptions...
, you can allow popups to be opened automatically for specific
websites.
To add an exception for the automatic opening of popups, proceed as follows:
a)
Click on
Exceptions...
.
b)
Click on
.
c)
In the
Website
field, give the URL of the website for which the exception is to apply.
d)
Click on
Ok
.
•
Load images automatically
: If this option is enabled, websites will be loaded in full, including all images.
If this option is disabled, the images will not be loaded and placeholders will be shown instead. As a
result of this, websites can be displayed more quickly, but the layout is impaired. With
Exceptions...
you can allow or prevent automatic loading for specific websites.
To add an exception for the automatic loading of images, proceed as follows:
a)
Click on
Exceptions...
.
b)
Click on
.
c)
In the
Website
field, give the URL of the website for which the exception is to apply.
d)
Using the
Status
drop-down menu, specify whether the automatic loading of images is to be
allowed or prevented for the given website.
e)
Click on
Ok
.
