30
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
•
The default setting
Automatic
automatically selects the appropriate codec according to the
performance of the hardware.
•
Alternatively, the codecs
H.264 Deep Compression Codec
for high-quality complex graphics and
JPEG
(less CPU-intensive) as well as their options
can also be selected manually.
This setup page can only be seen if you have selected a
Citrix
Receiver version which is higher
than 12.x.
The optional Multimedia Codec Pack is needed to use the H.264 Deep Compression Codec. Further
information can be found in the
IGEL Linux Features that Require the Multimedia Codec Pack FAQs
(
http://edocs.igel.com/index.htm#10200858.htm
).
5.4.
Legacy ICA Sessions
Menu path:
Setup > Sessions > Citrix XenDesktop/XenApp > Legacy ICA Sessions
You can set up your own ICA sessions here.
The global ICA session settings can be changed in the individual sessions.
The primary source of further information relating to
Citrix
connections should always be the relevant
Citrix
documentation. This manual merely gives general configuration tips.
5.4.1.
Server
Menu path:
Setup > Sessions > Citrix XenDesktop/XenApp > Legacy ICA Sessions > ICA Session > Server
In this area, you can overwrite the following server connection details and thus the default settings:
Browser protocol:
The protocol that is to be used when searching for servers and published applications.
Do not use default server location:
Lifts the default server requirement – for each protocol separately.
Server:
Click on
Search
to send a transmission signal which queries all available servers and published
applications.
By selecting the server, the user is connected to the entire desktop as if logging on at the server itself. As a
result, all applications, rights and settings contained in the user's profile (local server profile) are available.
If you select a published application, the session is opened in a window which contains just one application.
The session is ended if you close this application.
You can also manually enter the IP address or the host name of the server in the
Server
field.
Application:
If you have entered the server manually, you can specify a published application here. These
fields are automatically filled in if you have selected one of the recognized published applications.
Working directory:
Details of the path name of the work directory for the application
