111
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
8.1.1.
Individual interface
Menu path:
Setup > Network > LAN Interfaces > [Interface]
Under the name of the individual interface (for example
Interface 1
), you can overwrite some of the
general settings for LAN interfaces. In addition, there are two further settings:
IPv6 configuration
Here, you can choose a configuration type for operation with IPv6. You will
find further details in a
best practice document
(
http://edocs.igel.com/index.htm#10203497.htm
).
Network link type
Specify the network link type for the interface. The default is
Automatic
Recognition
.
Figure 42: Configuration of an individual interface
Authentication
Menu path:
Setup > Network > LAN Interfaces > [Interface] > Authentication
You can enable and configure network port authentication in accordance with the IEEE 802.1x standard
here. The following settings are available:
•
Enable IEEE-802.1x authentication
: This option enables network port authentication.
•
EAP Type:
You can choose between the
PEAP
and
TLS
authentication procedures here.
For the
EAP Type
PEAP, the following phase 2 authentication methods are available to choose
from under
Auth Method
:
•
MSCHAPV2
•
TLS
•
GTC
•
MD5
•
Validate Server Certificate
: If this option is enabled, the certificate of the server will be checked
cryptographically. In order to do this, the path to the CA certificate file is required in
CA Root
Certificate
. The file can be in PEM or DER format.
A number of the following fields need to be filled in only for specific combinations of
EAP type
and
Auth Method
.