![background image](http://html.mh-extra.com/html/ifm/efector300-sd0523/efector300-sd0523_operating-instructions-manual_620726028.webp)
28
10.3 Fault indications
[SC1]
Short circuit in OUT1�*
[SC2]
Short circuit in OUT2�*
[SC]
Short circuit in both outputs�*
[OL]
Measured value > 120 % of the final value of the measuring range�
[UL]
Measured value < initial value of the measuring range�
[Err]
Flashing: fault in the measuring probe�
*The output concerned is switched off as long as the short circuit exists�
These messages are displayed even if the display is switched off�
10.4 General operating conditions
The unit is maintenance-free for media which do not stick to the measuring
probes�
•
From time to time check the measuring probes visually for build-up�
•
If necessary, clean them at regular intervals� To do so, use a suitable cleaning
liquid (e�g� alcoholic solution)�
•
Avoid mechanical damage to the measuring probes�
11 Technical data and scale drawing
Technical data and scale drawing at www�ifm�com�
12 Factory setting
Factory setting
User setting
SP1
422
rP1
412
ImPS
1
ImPR
YES
OU1
Hno
OU2
I
SP2 (FLOW)
844