26
►
Press and hold
[Set]�
The flashing digit is increased, 9 is followed by 0 and the next
digit on the left becomes active�
8 1� 8 3
[Set] permanently pressed 8 1� 9 3
[Set] held pressed 8 1� 0 3
If digit 1 is increased this way, the display changes to the next
higher setting range (9 is followed by 10; the decimal point is
moved one digit to the right or the LED display changes)�
8 1� 2 3
[Set] permanently pressed 9 1� 2 3
[Set] held pressed 1 0 1� 2
►
Wait 3 s (do not
press any button)�
The next digit on the right flashes (= becomes active)�
8 1 2� 3
No button pressed; after 3 s 8 1 2� 3
after 3 s 8 1 2� 3
after 3 s 8 1 2� 3
If the 4th digit flashes for 3 s without being changed, digit 1
becomes active again if it has a value > 0�
after 3 s 8 1 2� 3
If digit 1 has the value "0", the display changes to the next lower
setting range (the decimal point is moved one digit to the left or
the LED display changes)�
0 1 2� 3
after 3 s 1 2� 3 0
Next: change digit 4 or wait 3 s and set digit 1�
after 3 s 1 2� 3 0
Grey background ( 1 ) = flashing digit�
Note: If [Set] is pressed continuously, the display moves through all ranges; after the end
value it jumps back to the start value� After this, release [Set] briefly and start the setting
again�
