IEMCA Elite Evo Series, Manual For Use And Maintenance

Page: 65 / 188

4 - HANDLING AND INSTALLATION Elite112_220_Evo_SIII
EN
4 - Pag. 5 / 5
4.3 INSTALLATION AREA - FEATURES (with and without displacement)
The floor should be stable and levelled to guarantee good fastening to the ground.
Provide an area of suitable dimensions according to the type of bar feeder used.
The areas (D) (work area), (E) (bar feeding area) and (F) (remnant ejection area) should be
properly delimited to prevent collisions between the operator and any handling equipment or
transport vehicles travelling near the bar feeder.
The selected area should be illuminated and provided with an electric and pneumatic power
supply socket.
During operation, the bar feeder will release small amounts of oil mist. Install the bar feeder in
a suitably ventilated area but not exposed to weather conditions.
The bar feeder has not been designed for use in an explosive atmosphere.
1-2 Without axial displacement
3-4 With axial displacement
Overall dimensions
MODEL VERSION A (mm) B (mm)
ELITE
32 3788
550
37 4358
INFORMATION:
carry out the bar feeder installation in a place which is sheltered from bad
weather.